Step By Step Guide On How To Cut Stone

In all fields of lapidary, you’ll need to take huge pieces of stone and change them into supportive, more unassuming measured pieces. If you’re in the field, you may have the choice to drop them off a precipice and recuperate the pieces at the base. This procedure has two impediments. Most importantly, precipices are only from time to time deliberately positioned. Second, it’s wasteful. Missing the mark on a supportive bluff, you’ll need to rely upon mechanical procedures for cutting unpleasant stones. 

Stone Cutting - Buildup Nepal

Accordingly, before you purchase cutting apparatuses, you can see how to best cut stone under: 

Measure How Big Of A Stone You Need 

If you need all of your stones a comparable size, you may realize the estimations you’re using. Be that as it may, you may not be using one explicit estimation. If you need a touch of stone to find a way into a particular space in the divider, measure that space’s measurements with an estimating tape. Guarantee you have the most ideal estimations as to the principal need before you begin cutting. 


Cutting rock is a hint of a sudden story in contrast with that of cutting calcareous stones like marble (or limestone, travertine, onyx, etc) because of its hardness. Stone edges ought to be proposed to cut in an ideal way with the objective that the cutting edges wears “equally” and gives you the best results. Likewise, you need a first-class connect saw that can oblige the stone cutting edge you pick.

If you have the right quality instruments, you will get the best results. Picking the best saw for the work and working with a fair rock cutting sharp edge would be a viable mix. 

Tile Cutter 

Manual tile cutters outfitted with tungsten carbide sharp edges can be used to cut various kinds of tile, including stone. You can rent these contraptions from many home improvement stores, or buy them for greater ventures. To use a tile shaper, insert the tile onto the cutting bed, by then, broaden the handle forward. Press the handle down, by then, pull it back to score the tile along its surface. Position the scored tile under the cutting edge and pull the handle down to snap it in two. 

Cutting Rough Stones: Saws for Fragile Gems 

Pounding is only useful for cabbing material of moderate worth. You would never pound an exorbitant piece of unpleasant. The misfortune could amount to a broad amount of money. Nor would you use this procedure on something fragile, like opal or calcite. Extending existing breaks would reduce the useable regions and worth of the material in an extreme add up to justify the investment funds in labour. For these materials, saws and tile youngsters are great. 

Imprint Where You’ll Split Your Stone 

Imprint right around the stone where you will make your cut. 


Quartzite is comparably as hard and fundamentally harder than rock and when you cut it, you need to use an edge that is expected for cutting hard materials. An edge that has partitions expected for cutting hard materials is your most ideal choice to the extent sharp edges go. 

Sledge And Chisel 

Cutting tile with a sledge and etch regularly makes harsh, blemished edges that may be alluring in more tough applications. Before you cut, use a straightedge and a carbide-tipped pencil to score the tile where you wish to cut it. Position the tip of your etches over the focal point of the scored line, by then, quickly tap the highest point of the etch with a mallet to snap the tile in two. Cutting tile consequently can be irksome, and requires a hint of preparing to consummate. 

These considerations ought to have the alternative to assist you with your stone cutting undertakings.